2x 25G OPT ports
 OPT 1 is used for primary input.
 OPT 2 serves as the backup of OPT 1.
 The primary input supports SMPTE ST 2110 (-10, 20) and SMPTE 2059 (-1, -2)
standards.
 The backup input supports SMPTE 2022-7 standard.
 Supports VESA standard video inputs with the maximum resolution of
4096×2160@60Hz

 Supports 8-bit/10-bit 4:4:4/4:2:2 inputs.
 Supports automatic identification of input source resolution and color space.
 Supports loading video stream configuration by SDP file or directly inputting.
 Supports BT.601/BT.709/BT.2020 inputs.
 Supports data transmission via 25 GbE IEEE 802.3cc (25GBASE-LR) and 25 GbE
IEEE 802.3by (25GBASE-SR) standards.
 Supports IGMPv2 and IGMPv3 multicast protocols.
 Supports IPv4 dynamic addressing of the connector IP address and transmission
of the static IP address.
 Input resolution settings are not allowed.
 Does not support interlaced signal input.

Status LEDs:
 On: The corresponding port has a signal.
 Off: The corresponding port has no signal.

Specifications:
 Weight: 500 g
 Dimensions: 193 mm × 247.12 mm × 21.15 mm
 Power consumption: 42 W

Notes:
 As it takes time for the connector to obtain the image, please do not repeatedly
plug and unplug the connector in a short period of time.
 Two 25G optical modules are included with the card and are already installed into
the OPT ports.